Presentation Delay (+_+)

Good news! presentation has been delayed to week 10..i have an extra time to make a preparation for that miserable day. Power point slide presentation currently in progress.

After doing a number of research and get some input from the advisor, i plan to generate an output for the simulation as picture above. this will be done by using Visual Basic software. 

The parameter would be:

1- Graph setting

2- PID setting

3- DC motor setting

DC motor graphic

A simple graphic to show the condition of motor while the parameter is simulate.

Step response graph

To display the result of percent overshoot and time taken to make the system become stable.

Stress Week!!

Since the presentation is on week 9 after semester break, the proposal and slide presentation must be done together with other assignment and lab. But i must be strong and taking this as a challenge for this semester. 

Madaaam give me A for my effort pleaseeee!! hewhew :P

Here are the guide for me to write the final year project proposal :-

INTRODUCTION

The contents of this guideline shall support the aims, objectives and schemes as

specified in the FYP Manual and Syllabus. It also explains the marking criteria to

guide the award of mark for assessed work.

FORMAT

The project proposal should have the following format:

• Title Page
• Abstract
• Table of Contents
• Introduction
• Problem Statement
• Literature Review
• Methodology
• Objectives
• Benefits/ Contributions
• Work Plan
• Budget
• Conclusion
• References

Block Diagram

The controller 
Provide the excitation for the plan
Control the overall of system bevavior

The plan

Will act as a system which need to be controlled. 

In this systems the setpoint are electric voltage that can adjusted to change the variable condition of the plant. During operation the PID controller will attempt to correct the error and improve the transient response between a measured process variable (output) and a desired set-point by calculating and then outputting a corrective action that can change the process accordingly.